How to Install Zentyal as Integrate Windows System and PDC

14. To select your HDD, here choose VMware virtual disk.

15. To create new partition table, Click yes and press Enter.

16. To Configure the Hard Disk Partitions.

In real server, assign more space for all of partitions, Follow the below steps

Select the free space and click enter now select the create a new partition

Now give the size for the boot partition

Select the partition type, here I’ m selecting primary

Select the location for the partition as beginning

Select the filesystem type as EXT4 and mount point as /boot. After configuring give Done setting up the partition

Now select the free space and give enter and then select create a new partition

Give the size for the swap partition

Since the swap partition should be double the size of RAM, I’ m giving 2GB for the swap partition. Select the partition type as primary

Select from which position of the free space the partition should be created

Select the filesystem type as Swap area

After configuring give Done setting up the partition

Select the free space and click enter now and then select the create a new partition

Now give the size for the root partition

Select the partition type as Primary

Select from which position of the free space the partition should be created

Select the filesystem type as EXT4 and mount point as / After configuring give done setting up the partition

Now select Finish partitioning and write changes to disks

17. To setup a Graphical Environment for Zentyal. If your server has both monitor and keyboard attached, then you have to select No, if not then select yes.

18. Now the Installation process starts.

19.If u use proxy server enter the proxy information or else leave the space blank and Click enter.

20. Selecting yes to install Grub bootloader into MBR.

21. Selecting Yes for next warning about UTC time.

22. Click enter to continue and the computer starts rebooting.

After rebooting, the system will install zentyal core packages.

To Install Basic Software' s for PDC

Open a web browser and enter the IP address or the hostname in search bar. For example: " https://192.168.7.124" . It gives warnings to you about a security issue certificate.

select " I Understand the Risks" , " Add exception" and " Confirm Security Exception" .

23. Just Enter your admin user name and password.

24. In Zentyal Web Administration, to Select and install software for our Primary Domain Controller.

25. Select the below mentioned packages for the server to become a PDC.

• Firewall
• Network Configuration
• Printer Sharing Service
• DNS Service
• File Sharing and Domain Services
• Users and Computers

To Confirm your packages installation

26. Configuring your Network Interface as Internal.

27. To select Static Method and give your static IP server address, DNS servers, Gateway and Netmask.

28. Selecting the Standalone server and type your domain name and then click Finish.

29. After PDC installation completes, navigate to DNS Module and check that your domain is in the Domain tab list.

30. Navigate to Users and Computers Module, choose Manage and include a user with Administrator Privileges for Active Directory.
To choose users , hit on " +" button below and type your credentials.

31. To select the user, in right side under User Groups field choose Domain Admins and click the " plus" button like below.

32. Navigate to Domain Module, choose Settings and select a description for your server and then choose " Enable roaming profiles" and also click Change.

33. In the top right, select on Save Changes to apply your new settings and hit Save.

To Integrate Windows System in PDC

34. Navigate to Start and select Control Panel and then click " Network and Internet" , after this choose " Network and Sharing Center" , then " View Network Status and Tasks" , after this choose Local Area Connection.

35. In Local Area Connection, choose Properties and then IPv4 and also enter your static IP address, Gateway, Netmask and DNS.