How to install Nagios Core 4.3.2 on CentOS

The dependency packages are installed. Create user and group for Nagios and then add apache and Nagios user to Nagios group by running the following command.

[root@nagios ~]# useradd nagios
[root@nagios ~]# passwd nagios
Changing password for user nagios.
New password:
BAD PASSWORD: it is WAY too short
BAD PASSWORD: is too simple
Retype new password:
passwd: all authentication tokens updated successfully.
[root@nagios ~]# groupadd nagcmd
[root@nagios ~]# usermod -a -G nagcmd nagios
[root@nagios ~]# usermod -a -G nagcmd apache

Go to the download folder where the downloaded Nagios tarball package is located and extract the package by executing the following tar command.

[root@nagios ~]# ls
anaconda-ks.cfg  Desktop  Documents  Downloads  install.log  install.log.syslog  Music  nagios-4.3.2.tar.gz  Pictures  Public  Templates  Videos
[root@nagios ~]# tar -xzvf nagios-4.3.2.tar.gz
nagios-4.3.2/
nagios-4.3.2/.gitignore
nagios-4.3.2/Changelog
nagios-4.3.2/INSTALLING
nagios-4.3.2/LEGAL
nagios-4.3.2/LICENSE
nagios-4.3.2/Makefile.in
nagios-4.3.2/README
nagios-4.3.2/README.asciidoc
nagios-4.3.2/THANKS
nagios-4.3.2/UPGRADING
.
.
.
nagios-4.3.2/xdata/xodtemplate.h
nagios-4.3.2/xdata/xpddefault.c
nagios-4.3.2/xdata/xpddefault.h
nagios-4.3.2/xdata/xrddefault.c
nagios-4.3.2/xdata/xrddefault.h
nagios-4.3.2/xdata/xsddefault.c
nagios-4.3.2/xdata/xsddefault.h

Now move to extracted directory to compile and install the extracted package.

[root@nagios ~]# cd nagios-4.3.2
[root@nagios nagios-4.3.2]# ./configure --with-command-group=nagcmd
checking for a BSD-compatible install... /usr/bin/install -c
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
.
.
.
Web Interface Options:
 ------------------------
                 HTML URL:  http://localhost/nagios/
                  CGI URL:  http://localhost/nagios/cgi-bin/
 Traceroute (used by WAP):  /bin/traceroute
Review the options above for accuracy.  If they look okay,

The package has been compiled. Now type ' make all' command to compile the main program and CGIs.

[root@nagios nagios-4.3.2]# make all
cd ./base & &  make
make[1]: Entering directory `/root/nagios-4.3.2/base' 
gcc -Wall -I.. -g -O2 -DHAVE_CONFIG_H -DNSCORE -c -o nagios.o nagios.c
gcc -Wall -I.. -g -O2 -DHAVE_CONFIG_H -DNSCORE   -c -o broker.o broker.c
gcc -Wall -I.. -g -O2 -DHAVE_CONFIG_H -DNSCORE   -c -o nebmods.o nebmods.c
gcc -Wall -I.. -g -O2 -DHAVE_CONFIG_H -DNSCORE -c -o ../common/shared.o ../common/shared.c
gcc -Wall -I.. -g -O2 -DHAVE_CONFIG_H -DNSCORE   -c -o nerd.o nerd.c
.
.
.
before you post a question to one of the mailing lists.
Also make sure to include pertinent information that could
help others help you.  This might include:
     - What version of Nagios you are using
     - What version of the plugins you are using
     - Relevant snippets from your config files
     - Relevant error messages from the Nagios log file
For more information on obtaining support for Nagios, visit:
       https://support.nagios.com
*************************************************************
Enjoy.

Next execute the make install and make-init command to install the package in the target system.

[root@nagios nagios-4.3.2]# make install
cd ./base & &  make install
make[1]: Entering directory `/root/nagios-4.3.2/base' 
make install-basic
make[2]: Entering directory `/root/nagios-4.3.2/base' 
/usr/bin/install -c -m 775 -o nagios -g nagios -d /usr/local/nagios/bin
/usr/bin/install -c -m 774 -o nagios -g nagios nagios /usr/local/nagios/bin
/usr/bin/install -c -m 774 -o nagios -g nagios nagiostats /usr/local/nagios/bin
make[2]: Leaving directory `/root/nagios-4.3.2/base' 
make strip-post-install
.
.
.
  make install-commandmode
     - This installs and configures permissions on the
       directory for holding the external command file
  make install-config
     - This installs sample config files in /usr/local/nagios/etc
make[1]: Leaving directory `/root/nagios-4.3.2' 

[root@nagios nagios-4.3.2]# make install-init
/usr/bin/install -c -m 755 -d -o root -g root /etc/rc.d/init.d
/usr/bin/install -c -m 755 -o root -g root daemon-init /etc/rc.d/init.d/nagios
*** Init script installed ***

Then, execute the install-config command to install the required configuration files.

[root@nagios nagios-4.3.2]# make install-config
/usr/bin/install -c -m 775 -o nagios -g nagios -d /usr/local/nagios/etc
/usr/bin/install -c -m 775 -o nagios -g nagios -d /usr/local/nagios/etc/objects
/usr/bin/install -c -b -m 664 -o nagios -g nagios sample-config/nagios.cfg /usr/local/nagios/etc/nagios.cfg
/usr/bin/install -c -b -m 664 -o nagios -g nagios sample-config/cgi.cfg /usr/local/nagios/etc/cgi.cfg
.
.
.
*** Config files installed ***
Remember, these are *SAMPLE* config files.  You' ll need to read
the documentation for more information on how to actually define
services, hosts, etc. to fit your particular needs.

Execute the make-install commandmode to install and configure the permissions on the directory for holding the external command file. And also execute the make-install webconf command to install and configure the webconf file in Nagios.

[root@nagios nagios-4.3.2]# make install-commandmode
/usr/bin/install -c -m 775 -o nagios -g nagcmd -d /usr/local/nagios/var/rw
chmod g+s /usr/local/nagios/var/rw
*** External command directory configured ***

[root@nagios nagios-4.3.2]# make install-webconf
/usr/bin/install -c -m 644 sample-config/httpd.conf /etc/httpd/conf.d/nagios.conf
if [ 0 -eq 1 ]  then 
         ln -s /etc/httpd/conf.d/nagios.conf /etc/apache2/sites-enabled/nagios.conf  
    fi
*** Nagios/Apache conf file installed ***

Create the Nagios web user interface and also password.

[root@nagios nagios-4.3.2]# htpasswd -c /usr/local/nagios/etc/htpasswd.users nagiosadmin
New password:
Re-type new password:
Adding password for user nagiosadmin

Once the credentials have been added. Restart the apache service by executing the following command.

[root@nagios nagios-4.3.2]# service httpd restart
Stopping httpd:                                            [  OK  ]
Starting httpd:                                            [  OK  ]

Now download the Nagios plugins tarball package by running the following command.

[root@nagios nagios-4.3.2]# cd
[root@nagios ~]# wget http://nagios-plugins.org/download/nagios-plugins-2.2.1.tar.gz
--2017-05-19 00:45:16--  http://nagios-plugins.org/download/nagios-plugins-2.2.1.tar.gz
Resolving nagios-plugins.org... 72.14.186.43
Connecting to nagios-plugins.org|72.14.186.43|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 2728818 (2.6M) [application/x-gzip]
Saving to: “ nagios-plugins-2.2.1.tar.gz” 
100%[==========================================================================================================================================================================> ] 2,728,818   33.2K/s   in 71s    
2017-05-19 00:46:28 (37.5 KB/s) - “ nagios-plugins-2.2.1.tar.gz”  saved [2728818/2728818]

Extract the Nagios plugin package by executing the following tar command.

[root@nagios ~]# tar -xzvf nagios-plugins-2.2.1.tar.gz
nagios-plugins-2.2.1/
nagios-plugins-2.2.1/perlmods/
nagios-plugins-2.2.1/perlmods/Config-Tiny-2.14.tar.gz
nagios-plugins-2.2.1/perlmods/parent-0.226.tar.gz
nagios-plugins-2.2.1/perlmods/Test-Simple-0.98.tar.gz
nagios-plugins-2.2.1/perlmods/Makefile.in
nagios-plugins-2.2.1/perlmods/version-0.9903.tar.gz
nagios-plugins-2.2.1/perlmods/Makefile.am
.
.
.
nagios-plugins-2.2.1/pkg/solaris/preinstall
nagios-plugins-2.2.1/pkg/solaris/solpkg
nagios-plugins-2.2.1/pkg/solaris/pkginfo.in
nagios-plugins-2.2.1/pkg/solaris/pkginfo
nagios-plugins-2.2.1/pkg/redhat/
nagios-plugins-2.2.1/pkg/redhat/requires

Install the Nagios plugins in the Nagios folder by running the following command.

[root@nagios ~]# cd nagios-plugins-2.2.1
[root@nagios nagios-plugins-2.2.1]# ./configure --with-nagios-user=nagios --with-nagios-group=nagios
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether to disable maintainer-specific portions of Makefiles... yes
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking for gcc... gcc
.
.
.
config.status: creating config.h
config.status: config.h is unchanged
config.status: executing depfiles commands
config.status: executing libtool commands
config.status: executing po-directories commands
config.status: creating po/POTFILES
config.status: creating po/Makefile

Execute the make command to start the installation process.

[root@nagios nagios-plugins-2.2.1]# make
make  all-recursive
make[1]: Entering directory `/root/nagios-plugins-2.2.1' 
Making all in gl
make[2]: Entering directory `/root/nagios-plugins-2.2.1/gl' 
rm -f alloca.h-t alloca.h & &  
    { echo ' /* DO NOT EDIT! GENERATED AUTOMATICALLY! */'   
      cat ./alloca.in.h  
    } >  alloca.h-t & &  
.
.
.
make[2]: Leaving directory `/root/nagios-plugins-2.2.1/po' 
make[2]: Entering directory `/root/nagios-plugins-2.2.1' 
make[2]: Leaving directory `/root/nagios-plugins-2.2.1' 
make[1]: Leaving directory `/root/nagios-plugins-2.2.1' 

Execute the make-install command to install and configure the required directory.

[root@nagios nagios-plugins-2.2.1]# make install
Making install in gl
make[1]: Entering directory `/root/nagios-plugins-2.2.1/gl' 
make  install-recursive
make[2]: Entering directory `/root/nagios-plugins-2.2.1/gl' 
make[3]: Entering directory `/root/nagios-plugins-2.2.1/gl' 
.
.
.
make[2]: Entering directory `/root/nagios-plugins-2.2.1' 
make[2]: Nothing to be done for `install-exec-am' .
make[2]: Nothing to be done for `install-data-am' .
make[2]: Leaving directory `/root/nagios-plugins-2.2.1' 
make[1]: Leaving directory `/root/nagios-plugins-2.2.1' 

[root@nagios nagios-plugins-2.2.1]# /usr/local/nagios/bin/nagios -v /usr/local/nagios/etc/nagios.cfg
Nagios Core 4.3.2
Copyright (c) 2009-present Nagios Core Development Team and Community Contributors
Copyright (c) 1999-2009 Ethan Galstad
Last Modified: 2017-05-09
License: GPL
Website: https://www.nagios.org
Reading configuration data...
   Read main config file okay...
   Read object config files okay...
Running pre-flight check on configuration data...
Checking objects...
    Checked 8 services.
    Checked 1 hosts.
    Checked 1 host groups.
    Checked 0 service groups.
    Checked 1 contacts.
    Checked 1 contact groups.
    Checked 24 commands.
    Checked 5 time periods.
    Checked 0 host escalations.
    Checked 0 service escalations.
Checking for circular paths...
    Checked 1 hosts
    Checked 0 service dependencies
    Checked 0 host dependencies
    Checked 5 timeperiods
Checking global event handlers...
Checking obsessive compulsive processor commands...
Checking misc settings...
Total Warnings: 0
Total Errors:   0
Things look okay - No serious problems were detected during the pre-flight check

[root@nagios nagios-plugins-2.2.1]# service nagios start
Starting nagios: done.
[root@nagios nagios-plugins-2.2.1]# chkconfig nagios on