How to install Asterisk 16 LTS on Ubuntu 21.04
- 00:34 lsb_release -a
- 00:44 cd /usr/src/
- 00:56 curl -O http://downloads.asterisk.org/pub/telephony/asterisk/asterisk-16-current.tar.gz
- 01:13 tar xvf asterisk-16-current.tar.gz
- 01:30 cd asterisk-16.23.0/
- 01:44 contrib/scripts/get_mp3_source.sh
- 02:17 apt update
- 02:31 contrib/scripts/install_prereq install
- 03:14 ./configure
- 03:52 make menuselect
- 04:50 make
- 06:32 make install
- 07:03 make samples
- 07:18 make config
- 07:33 ldconfig
- 07:43 groupadd asterisk
- 08:01 useradd -r -d /var/lib/asterisk -g asterisk asterisk
- 08:32 usermod -aG audio,dialout asterisk
- 09:13 chown -R asterisk.asterisk /etc/asterisk
- 09:20 chown -R asterisk.asterisk /var/{lib,log,spool}/asterisk
- 09:24 chown -R asterisk.asterisk /usr/lib/asterisk
- 10:07 vim /etc/default/asterisk
- 10:45 vim /etc/asterisk/asterisk.conf
- 11:23 systemctl restart asterisk
- 11:35 systemctl enable asterisk
- 11:55 systemctl status asterisk
{{postValue.id}}
To Install Asterisk 16 LTS on Ubuntu 21.04
Introduction:
Asterisk is a complete telephony server that provides Private Branch Exchange (PBX), Interactive Voice Response (IVR), Automated Call Distribution (ACD), Voice over IP (VoIP) gatewaying, Conferencing, and a wide variety of other telephony applications to a broad range of telephony devices including packet voice devices.
Installation Procedure:
Step 1:Check the OS version by using following command
root@linuxhelp:~# lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 21.04
Release: 21.04
Codename: hirsute
Step 2:Change the directory by using the below command
root@linuxhelp:~# cd /usr/src/
Step 3:Download the Asterisk by using below command
root@linuxhelp:/usr/src# curl -O http://downloads.asterisk.org/pub/telephony/asterisk/asterisk-16-current.tar.gz
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 26.6M 100 26.6M 0 0 7375k 0 0:00:03 0:00:03 --:--:-- 7373k
Step 4:Extract the downloaded file by using the below command
root@linuxhelp:/usr/src# tar xvf asterisk-16-current.tar.gz
asterisk-16.23.0/
asterisk-16.23.0/.cleancount
asterisk-16.23.0/.gitignore
asterisk-16.23.0/.gitreview
asterisk-16.23.0/.lastclean
asterisk-16.23.0/.version
asterisk-16.23.0/BSDmakefile
asterisk-16.23.0/BUGS
asterisk-16.23.0/CHANGES
asterisk-16.23.0/COPYING
asterisk-16.23.0/CREDITS
asterisk-16.23.0/ChangeLog
asterisk-16.23.0/LICENSE
asterisk-16.23.0/Makefile
asterisk-16.23.0/Makefile.moddir_rules
asterisk-16.23.0/Makefile.rules
asterisk-16.23.0/README-SERIOUSLY.bestpractices.md
asterisk-16.23.0/README-addons.txt
asterisk-16.23.0/README.md
asterisk-16.23.0/UPGRADE.txt
asterisk-16.23.0/Zaptel-to-DAHDI.txt
asterisk-16.23.0/addons/
asterisk-16.23.0/addons/.gitignore
asterisk-16.23.0/addons/Makefile
asterisk-16.23.0/utils/expr2.testinput
asterisk-16.23.0/utils/extconf.c
asterisk-16.23.0/utils/frame.c
asterisk-16.23.0/utils/frame.h
asterisk-16.23.0/utils/muted.c
asterisk-16.23.0/utils/smsq.c
asterisk-16.23.0/utils/stereorize.c
asterisk-16.23.0/utils/streamplayer.c
asterisk-16.23.0/utils/utils.xml
Step 5:Change the directory to the “asterisk-16.23.0” by using the below command
root@linuxhelp:/usr/src# cd asterisk-16.23.0/
Step 6: Download the mp3 decoder library into the source tree by using the below command
root@linuxhelp:/usr/src/asterisk-16.23.0# contrib/scripts/get_mp3_source.sh
A addons/mp3
A addons/mp3/dct64_i386.c
A addons/mp3/MPGLIB_TODO
A addons/mp3/mpg123.h
A addons/mp3/layer3.c
A addons/mp3/mpglib.h
A addons/mp3/decode_ntom.c
A addons/mp3/interface.c
A addons/mp3/MPGLIB_README
A addons/mp3/common.c
A addons/mp3/huffman.h
A addons/mp3/tabinit.c
A addons/mp3/Makefile
A addons/mp3/README
A addons/mp3/decode_i386.c
Exported revision 202.
Step 7:Update the apt source list by using the below command
root@linuxhelp:/usr/src/asterisk-16.23.0# apt update
Hit:1 http://in.archive.ubuntu.com/ubuntu hirsute InRelease
Hit:2 http://in.archive.ubuntu.com/ubuntu hirsute-updates InRelease
Hit:3 http://in.archive.ubuntu.com/ubuntu hirsute-backports InRelease
Hit:4 http://security.ubuntu.com/ubuntu hirsute-security InRelease
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
All packages are up to date.
Step 8:Install the dependencies by using the below command
root@linuxhelp:/usr/src/asterisk-16.23.0# contrib/scripts/install_prereq install
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
The following package was automatically installed and is no longer required:
libllvm11
Use 'apt autoremove' to remove it.
The following additional packages will be installed:
aptitude-common libboost-iostreams1.74.0 libcwidget4 libxapian30
Suggested packages:
apt-xapian-index aptitude-doc-en | aptitude-doc debtags tasksel libcwidget-dev xapian-tools
The following NEW packages will be installed:
aptitude aptitude-common libboost-iostreams1.74.0 libcwidget4 libxapian30
0 upgraded, 5 newly installed, 0 to remove and 0 not upgraded.
Need to get 4,027 kB of archives.
After this operation, 19.7 MB of additional disk space will be used.
Get:1 http://in.archive.ubuntu.com/ubuntu hirsute/universe amd64 aptitude-common all 0.8.13-
.
(Reading database ... 177765 files and directories currently installed.)
Setting up unixodbc-dev:amd64 (2.3.6-0.1build1) ...
Processing triggers for libglib2.0-0:amd64 (2.68.1-1~ubuntu21.04.1) ...
Processing triggers for libc-bin (2.33-0ubuntu5) ...
Processing triggers for man-db (2.9.4-2) ...
Processing triggers for sgml-base (1.30) ...
Processing triggers for install-info (6.7.0.dfsg.2-6) ...
Setting up libgmime-3.0-dev:amd64 (3.2.7-1) ...
Setting up libpcap0.8-dev:amd64 (1.10.0-2) ...
Setting up libsrtp2-dev (2.3.0-5) ...
#############################################
## install completed successfully
#############################################
Step 9:Run the configure script to build the dependencies by using the below command
root@linuxhelp:/usr/src/asterisk-16.23.0# ./configure
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
[pjproject] Configuring with --prefix=/opt/pjproject --disable-speex-codec --disable-speex-aec --disable-bcg729 --disable-gsm-codec --disable-ilbc-codec --disable-l16-codec --disable-g722-codec --disable-g7221-codec --disable-opencore-amr --disable-silk --disable-opus --disable-video --disable-v4l2 --disable-sound --disable-ext-sound --disable-sdl --disable-libyuv --disable-ffmpeg --disable-openh264 --disable-ipp --disable-libwebrtc --without-external-pa --without-external-srtp --disable-resample --disable-g711-codec --enable-epoll
config.status: creating autoconfig.h
configure: Menuselect build configuration successfully completed
.$$$$$$$$$$$$$$$=..
.$7$7.. .7$$7:.
.$$:. ,$7.7
.$7. 7$$$$ .$$77
..$$. $$$$$ .$$$7
..7$ .?. $$$$$ .?. 7$$$.
$.$. .$$$7. $$$$7 .7$$$. .$$$.
.777. .$$$$$$77$$$77$$$$$7. $$$,
$$$~ .7$$$$$$$$$$$$$7. .$$$.
.$$7 .7$$$$$$$7: ?$$$.
$$$ ?7$$$$$$$$$$I .$$$7
$$$ .7$$$$$$$$$$$$$$$$ :$$$.
$$$ $$$$$$7$$$$$$$$$$$$ .$$$.
$$$ $$$ 7$$$7 .$$$ .$$$.
$$$$ $$$$7 .$$$.
7$$$7 7$$$$ 7$$$
$$$$$ $$$
$$$$7. $$ (TM)
$$$$$$$. .7$$$$$$ $$
$$$$$$$$$$$$7$$$$$$$$$.$$$$$$
$$$$$$$$$$$$$$$$.
configure: Package configured for:
configure: OS type : linux-gnu
configure: Host CPU : x86_64
configure: build-cpu:vendor:os: x86_64 : pc : linux-gnu :
configure: host-cpu:vendor:os: x86_64 : pc : linux-gnu :
Step 10:Setup the Menu option by using the below command
root@linuxhelp:/usr/src/asterisk-16.23.0# make menuselect
CC="cc" CXX="g++" LD="" AR="" RANLIB="" CFLAGS="" LDFLAGS="" make -C menuselect CONFIGURE_SILENT="--silent" cmenuselect
make[1]: Entering directory '/usr/src/asterisk-16.23.0/menuselect'
gcc -g -D_GNU_SOURCE -Wall -Wno-deprecated-declarations -DHAVE_NCURSES -I/usr/include/libxml2 -c -o menuselect.o menuselect.c
gcc -g -D_GNU_SOURCE -Wall -Wno-deprecated-declarations -DHAVE_NCURSES -c -o strcompat.o strcompat.c
gcc -g -D_GNU_SOURCE -Wall -Wno-deprecated-declarations -DHAVE_NCURSES -c -o menuselect_curses.o menuselect_curses.c
gcc -o cmenuselect menuselect.o strcompat.o menuselect_curses.o -lncurses -ltinfo -lxml2
make[1]: Leaving directory '/usr/src/asterisk-16.23.0/menuselect'
CC="cc" CXX="g++" LD="" AR="" RANLIB="" CFLAGS="" LDFLAGS="" make -C menuselect CONFIGURE_SILENT="--silent" nmenuselect
make[1]: Entering directory '/usr/src/asterisk-16.23.0/menuselect'
gcc -g -D_GNU_SOURCE -Wall -Wno-deprecated-declarations -DHAVE_NCURSES -c -o menuselect_newt.o menuselect_newt.c
gcc -o nmenuselect menuselect.o strcompat.o menuselect_newt.o -lnewt -lxml2
make[1]: Leaving directory '/usr/src/asterisk-16.23.0/menuselect'
CC="cc" CXX="g++" LD="" AR="" RANLIB="" CFLAGS="" LDFLAGS="" make -C menuselect CONFIGURE_SILENT="--silent" gmenuselect
make[1]: Entering directory '/usr/src/asterisk-16.23.0/menuselect'
make[1]: Nothing to be done for 'gmenuselect'.
make[1]: Leaving directory '/usr/src/asterisk-16.23.0/menuselect'
make[1]: Entering directory '/usr/src/asterisk-16.23.0'
Step 11:Mark the chan_ooh and format_mp3 on ADD-ons
Step 12:Select the Audio format packages on core sound packages
Step 13:Select the Minimal Modules on Music on Hold
Step 14:Select the following packages on Extra sound packages
Step 15:Select the app_macro on Applications
Step 16:Build Asterisk by running make
root@linuxhelp:/usr/src/asterisk-16.23.0# make
[CC] astcanary.c -> astcanary.o
[LD] astcanary.o -> astcanary
[CC] astdb2sqlite3.c -> astdb2sqlite3.o
[CC] hash/hash.c -> hash/hash.o
[CC] hash/hash_bigkey.c -> hash/hash_bigkey.o
[CC] hash/hash_buf.c -> hash/hash_buf.o
[CC] hash/hash_func.c -> hash/hash_func.o
[CC] hash/hash_log2.c -> hash/hash_log2.o
[CC] hash/hash_page.c -> hash/hash_page.o
[CC] hash/ndbm.c -> hash/ndbm.o
[CC] btree/bt_search.c -> btree/bt_search.o
[CC] btree/bt_seq.c -> btree/bt_seq.o
[LD] format_mp3.o mp3/common.o mp3/dct64_i386.o mp3/decode_ntom.o mp3/layer3.o mp3/tabinit.o mp3/interface.o -> format_mp3.so
Building Documentation For: third-party channels pbx apps codecs formats cdr cel bridges funcs tests main res addons
+--------- Asterisk Build Complete ---------+
+ Asterisk has successfully been built, and +
+ can be installed by running: +
+ +
+ make install +
+-------------------------------------------+
Step 17:After build run make to install Asterisk
root@linuxhelp:/usr/src/asterisk-16.23.0# make install
Installing modules from channels...
Installing modules from pbx...
Installing modules from apps...
Installing modules from codecs...
Installing modules from formats...
Installing modules from cdr...
Installing modules from cel...
Installing modules from bridges...
Installing modules from funcs...
Installing modules from tests...
Installing modules from main...
Installing modules from res...
Installing modules from addons...
/usr/bin/install -c -d "/usr/include/asterisk/doxygen"
/usr/bin/install -c -m 644 include/asterisk.h "/usr/include"
/usr/bin/install -c -m 644 include/asterisk/*.h "/usr/include/asterisk"
/usr/bin/install -c -m 644 include/asterisk/doxygen/*.h "/usr/include/asterisk/doxygen"
if [ -n "" ]; then \
for h in ; do rm -f "/usr/include/asterisk/$h"; done \
fi
/usr/bin/install -c -m 755 contrib/scripts/astversion "/usr/sbin/"
/usr/bin/install -c -m 755 contrib/scripts/astgenkey "/usr/sbin/"
/usr/bin/install -c -m 755 contrib/scripts/autosupport "/usr/sbin/"
if [ ! -f /sbin/launchd ]; then \
./build_tools/install_subst contrib/scripts/safe_asterisk "/usr/sbin/safe_asterisk"; \
fi
/usr/bin/install -c -m 644 doc/core-*.xml "/var/lib/asterisk/documentation"
/usr/bin/install -c -m 644 doc/appdocsxml.xslt "/var/lib/asterisk/documentation"
/usr/bin/install -c -m 644 doc/appdocsxml.dtd "/var/lib/asterisk/documentation"
/usr/bin/install -c -m 644 doc/asterisk.8 "/usr/share/man/man8"
/usr/bin/install -c -m 644 doc/astdb*.8 "/usr/share/man/man8"
/usr/bin/install -c -m 644 contrib/scripts/astgenkey.8 "/usr/share/man/man8"
/usr/bin/install -c -m 644 contrib/scripts/autosupport.8 "/usr/share/man/man8"
/usr/bin/install -c -m 644 contrib/scripts/safe_asterisk.8 "/usr/share/man/man8"
if [ -f contrib/firmware/iax/iaxy.bin ] ; then \
/usr/bin/install -c -m 644 contrib/firmware/iax/iaxy.bin "/var/lib/asterisk/firmware/iax/iaxy.bin"; \
fi
CFLAGS=" -I/usr/include/libxml2 -pipe -Wall -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -g3 " build_tools/mkpkgconfig "/usr/lib/pkgconfig";
find static-http | while read x; do \
if test -d $x; then \
/usr/bin/install -c -m 755 -d "/var/lib/asterisk/$x"; \
else \
/usr/bin/install -c -m 644 $x "/var/lib/asterisk/$x" ; \
fi \
done
/usr/bin/install -c -m 644 doc/core-en_US.xml "/var/lib/asterisk/static-http";
/usr/bin/install -c -m 644 doc/appdocsxml.xslt "/var/lib/asterisk/static-http";
if [ -d doc/tex/asterisk ] ; then \
/usr/bin/install -c -d "/var/lib/asterisk/static-http/docs" ; \
for n in doc/tex/asterisk/* ; do \
/usr/bin/install -c -m 644 $n "/var/lib/asterisk/static-http/docs" ; \
done \
fi
for x in images/*.jpg; do \
/usr/bin/install -c -m 644 $x "/var/lib/asterisk/images" ; \
done
make -C sounds install
make[1]: Entering directory '/usr/src/asterisk-16.23.0/sounds'
HTTP request sent, awaiting response... 200 OK
Length: 1777967 (1.7M) [application/x-gzip]
Saving to: ‘asterisk-moh-opsound-gsm-2.03.tar.gz’
asterisk-moh-opsound-gsm-2.03 100%[===============================================>] 1.70M 10.7MB/s in 0.2s
2022-01-19 04:30:57 (10.7 MB/s) - ‘asterisk-moh-opsound-gsm-2.03.tar.gz’ saved [1777967/1777967]
make[1]: Leaving directory '/usr/src/asterisk-16.23.0/sounds'
find rest-api -name "*.json" | while read x; do \
/usr/bin/install -c -m 644 $x "/var/lib/asterisk/rest-api" ; \
done
+---- Asterisk Installation Complete -------+
+ +
+ YOU MUST READ THE SECURITY DOCUMENT +
+ +
+ Asterisk has successfully been installed. +
+ If you would like to install the sample +
+ configuration files (overwriting any +
+ existing config files), run: +
+ +
+ For generic reference documentation: +
+ make samples +
+ +
+ For a sample basic PBX: +
+ make basic-pbx +
+ +
+ +
+----------------- or ---------------------+
+ +
+ You can go ahead and install the asterisk +
+ program documentation now or later run: +
+ +
+ make progdocs +
+ +
+ **Note** This requires that you have +
+ doxygen installed on your local system +
+-------------------------------------------+
Step 18:Install the samples by using the below command
root@linuxhelp:/usr/src/asterisk-16.23.0# make samples
Installing adsi config files...
/usr/bin/install -c -d "/etc/asterisk"
Installing configs/samples/asterisk.adsi
Installing configs/samples/telcordia-1.adsi
Installing other config files...
Installing file configs/samples/acl.conf.sample
Installing file configs/samples/adsi.conf.sample
Installing file configs/samples/agents.conf.sample
Installing file configs/samples/alarmreceiver.conf.sample
Installing file configs/samples/alsa.conf.sample
Installing file configs/samples/amd.conf.sample
Installing file configs/samples/app_mysql.conf.sample
Installing file configs/samples/app_skel.conf.sample
Installing file configs/samples/ari.conf.sample
Installing file configs/samples/ast_debug_tools.conf.sample
Installing file configs/samples/asterisk.conf.sample
Installing file configs/samples/calendar.conf.sample
Installing file configs/samples/ccss.conf.sample
Installing file configs/samples/indications.conf.sample
Installing file configs/samples/logger.conf.sample
Installing file configs/samples/manager.conf.sample
Installing file configs/samples/vpb.conf.sample
Installing file configs/samples/xmpp.conf.sample
Updating asterisk.conf
/usr/bin/install -c -d "/var/spool/asterisk/voicemail/default/1234/INBOX"
build_tools/make_sample_voicemail "//var/lib/asterisk" "//var/spool/asterisk"
Installing file phoneprov/000000000000.cfg
Installing file phoneprov/000000000000-directory.xml
Installing file phoneprov/000000000000-phone.cfg
Installing file phoneprov/polycom_line.xml
Installing file phoneprov/polycom.xml
Installing file phoneprov/snom-mac.xml
Step 19:Install the configs by using the below command
root@linuxhelp:/usr/src/asterisk-16.23.0# make config
Step 20: ldconfig creates the necessary links and cache to the most recent shared libraries found
root@linuxhelp:/usr/src/asterisk-16.23.0# ldconfig
Step 21:Create a group as asterisk by using the below command
root@linuxhelp:/usr/src/asterisk-16.23.0# groupadd asterisk
Step 22:Create a user as asterisk and adding to the group asterisk by using the below command
root@linuxhelp:/usr/src/asterisk-16.23.0# useradd -r -d /var/lib/asterisk -g asterisk asterisk
Step 23:Add asterisk user to the some more groups by using the below command
root@linuxhelp:/usr/src/asterisk-16.23.0# usermod -aG audio,dialout asterisk
Step 24:Change the ownership as asterisk for the following directories
root@linuxhelp:/usr/src/asterisk-16.23.0# chown -R asterisk.asterisk /etc/asterisk
root@linuxhelp:/usr/src/asterisk-16.23.0# chown -R asterisk.asterisk /var/{lib,log,spool}/asterisk
root@linuxhelp:/usr/src/asterisk-16.23.0# chown -R asterisk.asterisk /usr/lib/asterisk
Step 25:Set default user as asterisk by using the below command
root@linuxhelp:/usr/src/asterisk-16.23.0# vim /etc/default/asterisk
Step 26:Set the Asterisk conf will run as asterisk user by using the below command
root@linuxhelp:/usr/src/asterisk-16.23.0# vim /etc/asterisk/asterisk.conf
Step 27:Restart the Asterisk service by using the below command
root@linuxhelp:/usr/src/asterisk-16.23.0# systemctl restart asterisk
Step 28:Enable the Asterisk service to start on boot by using the below command
root@linuxhelp:/usr/src/asterisk-16.23.0# systemctl enable asterisk
asterisk.service is not a native service, redirecting to systemd-sysv-install.
Executing: /lib/systemd/systemd-sysv-install enable asterisk
Step 29:Check the status of the Asterisk service by using the below command
root@linuxhelp:/usr/src/asterisk-16.23.0# systemctl status asterisk
● asterisk.service - LSB: Asterisk PBX
Loaded: loaded (/etc/init.d/asterisk; generated)
Active: active (running) since Wed 2022-01-19 04:44:40 IST; 29s ago
Docs: man:systemd-sysv-generator(8)
Tasks: 77 (limit: 2254)
Memory: 114.7M
CGroup: /system.slice/asterisk.service
└─50939 /usr/sbin/asterisk -U asterisk -G asterisk
Jan 19 04:44:39 linuxhelp systemd[1]: Starting LSB: Asterisk PBX...
Jan 19 04:44:39 linuxhelp asterisk[50924]: * Starting Asterisk PBX: asterisk
Jan 19 04:44:40 linuxhelp asterisk[50924]: ...done.
Jan 19 04:44:40 linuxhelp systemd[1]: Started LSB: Asterisk PBX.
Jan 19 04:44:42 linuxhelp asterisk[50939]: radcli: rc_read_config: rc_read_config: can't open /etc/radiusclient-ng/ra>
Jan 19 04:44:42 linuxhelp asterisk[50939]: radcli: rc_read_config: rc_read_config: can't open /etc/radiusclient-ng/ra>
Step 30: Login to the Asterisk CLI by using the below command
Root@linuxhelp:/usr/src/asterisk-16.23.0# asterisk -rvv
Asterisk 16.23.0, Copyright (C) 1999 - 2021, Sangoma Technologies Corporation and others.
Created by Mark Spencer <markster@digium.com>
Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details.
This is free software, with components licensed under the GNU General Public
License version 2 and other licenses; you are welcome to redistribute it under
certain conditions. Type 'core show license' for details.
=========================================================================
Running as user 'asterisk'
Running under group 'asterisk'
Connected to Asterisk 16.23.0 currently running on linuxhelp (pid = 50939)
linuxhelp*CLI>
By this the installation of Asterisk 16 LTS on Ubuntu 21.04 have been Completed
Comments ( 0 )
No comments available